
Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net
This is the Release Candidate of the new Fastest
Engine for osXBar 1.0
You can start to try the 1.0.23 RC1:
Enable Fast Image Scaling, my engine will do Smooth
PLEASE send feedback!!!! and VOTE to POLLS on my WEBSITE, it will help me to develop a better osXBar 1.0 :)
[screenshots, stuff, changelogs are on my website]
PS:
Mandrake, RedHat and other ones...
remeber:
export KDEDIR
PPS:
Do not download older version osXBar0.X!
PPPS:
It osXBar 1.0 run slow, or crash check osXBar.conf!
PPPPPS:
************** Important *************
http://www.xiaprojects.com/www/prodotti/osxbar/main.php?action=skpatch
There is my superkaramba 0.33 patch it will be REQUIRED to RUN osXBar 1.0.23
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
17 years ago
Check changelog on my website
on Gen 2004 I will start working to osXBar 1.1 with new engine, I hope to make osXBar 1.0 stable before :) send feedback...
If you would you like download tar.gz download the installer or use update from web site
send feedback about installer and configurator
I'm writing a Manual, do you like?
Can you help me to translate to your language?
17 years ago
Check changelog on my website
on Gen 2004 I will start working to osXBar 1.1 with new engine, I hope to make osXBar 1.0 stable before :) send feedback...
If you would you like download tar.gz download the installer or use update from web site
send feedback about installer and configurator
I'm writing a Manual, do you like?
Can you help me to translate to your language?
cypherpunk
14 years ago
Mandriva 2007.0
Report
jimbren
15 years ago
the upper left corner gave me an odd blank box for a few minutes, that's about all.
Report
psY-MaUz
14 years ago
I have the same problem...
I'm using Kubuntu 6.10 Edgy Eft and Superkaramba 0.41
It's to bad, because i think i wuold like your bar :)
I hope u still working on it and help me :)
Report
sledgefisher
14 years ago
Report
RahulBatra
14 years ago
Report
rever75
15 years ago
Report
dBaser
15 years ago
Report
weatherman
15 years ago
Report
jake3988
15 years ago
1) The script will not download.
2) If I do it the regular way: ./osXBar.configure (this is a text file, thus can't do anything)
any ideas?
Report
stony777
16 years ago
But could you please give the whole name of the wallpaper-site you got that wallpaper from - it seems good ;)
It was just not readable due to the bar ;)
Report
AntiChrist
16 years ago
Almost every theme does not work or you have too much sparetime.
Report
paulmccobels
16 years ago
For diagnosys, let me tell you I'm using KDE 3.3 from the debian port for amd64, which comes with superkaramba 0.35-2 as i checked at the package manager.
I don't know how to fix this problem, and, judging from the comments written by other users, it seems like it is a very common bug.
Can somebody tell us how to fix this?
I would be most grateful if you did.
Report
MaDiNfO
16 years ago
Report
seventhguardian
16 years ago
Report
cristi1979
16 years ago
Report
cristi1979
16 years ago
Call to initWidget failed
Traceback (most recent call last):
File "/home/cristi/.superkaramba/osXBar_1.0.23_snow/osXBar.py", line 71, in initWidget
theEngine.Init(2)
File "/home/cristi/.superkaramba/osXBar_1.0.23_snow/osXBarEngine.py", line 259, in Init
theOptions.Init(NextStatus)
File "/home/cristi/.superkaramba/osXBar_1.0.23_snow/osXBarOptions.py", line 29, in Init
karamba.setMenuConfigOption(self.Engine.Widget, "osxbar_arrow", "1")
TypeError: an integer is required
Report
aziz93or
16 years ago
I get this message error when i try to launch osXBar ...
> Call to initWidget failed
> Traceback (most recent call last):
> File "osXBar.py", line 71, in initWidget
> theEngine.Init(2)
> File "osXBarEngine.py", line 259, in Init
> theOptions.Init(NextStatus)
> File "osXBarOptions.py", line 29, in Init
> karamba.setMenuConfigOption(self.Engine.Widget, "osxbar_arrow", "1")
> TypeError: an integer is required
What should i do ?
Report
aziz93or
16 years ago
It don't seem to works !!!
Report
dingdingdong
16 years ago
Attached is the error:
Using host libthread_db library "/lib/tls/libthread_db.so.1".
[Thread debugging using libthread_db enabled]
[New Thread 1097301440 (LWP 5658)]
[KCrash handler]
#7 0x40ea5ee9 in QString::QString () from /usr/lib/qt3/lib/libqt-mt.so.3
#8 0x080ae728 in ThemeListWindow::closeTheme ()
#9 0x080b40fb in ThemeListWindow::qt_invoke ()
#10 0x40bc40ee in QObject::activate_signal ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#11 0x40bc4896 in QObject::activate_signal ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#12 0x40f1c02c in QButton::clicked () from /usr/lib/qt3/lib/libqt-mt.so.3
#13 0x40c5c4c9 in QButton::mouseReleaseEvent ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#14 0x40bfa3f5 in QWidget::event () from /usr/lib/qt3/lib/libqt-mt.so.3
#15 0x40b6185f in QApplication::internalNotify ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#16 0x40b63c06 in QApplication::notify () from /usr/lib/qt3/lib/libqt-mt.so.3
#17 0x407f7a91 in KApplication::notify () from /opt/kde3/lib/libkdecore.so.4
#18 0x40afefce in QETWidget::translateMouseEvent ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#19 0x40afde86 in QApplication::x11ProcessEvent ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#20 0x40b0e908 in QEventLoop::processEvents ()
from /usr/lib/qt3/lib/libqt-mt.so.3
#21 0x40b797b1 in QEventLoop::enterLoop () from /usr/lib/qt3/lib/libqt-mt.so.3
#22 0x40b795f6 in QEventLoop::exec () from /usr/lib/qt3/lib/libqt-mt.so.3
#23 0x40b632ef in QApplication::exec () from /usr/lib/qt3/lib/libqt-mt.so.3
#24 0x0807857f in main ()
Hope you guys out there can help.
Report
basei
16 years ago
I've applied the patch, it dont works.
I 've now the superkarmba version 3.4
Thankyou
osXBar 1.0 FATAL ERROR:
Cannot load module: xcursor.so
FAQ:
- Where I can get a working xcursor.so module?
You can get it after you have compiled superkaramba in [examples/globalMouse/xcursor.so]
- Are you using a distro and don't know how to do this?
Try to download it from [http://www.xiaprojects.com/www/prodotti/osxbar/main.php]
- I have xcursor.so but it does not work for me
Send email to me: stefano _@_ xiaprojects.com
Traceback (most recent call last):
File "osXBar.py", line 54, in ?
import osXBarEngine
File "osXBarEngine.py", line 12, in ?
import xcursor
ImportError: Shared object "libc.so.6" not found
------------------------------------------------------
What does ImportError mean?
It means that I couldn't load a python add-on for osXBar.theme
If this is a regular theme and doesn't use python
extensions, then nothing is wrong.
------------------------------------------------------
Report
fredRX
16 years ago
Version 1.0.23 snow won't work.
Older version are working fine...
I'm using Superkaramba 0.34 with Mandrake 10.0 AMD64 RC1
Do I have to apply the Superkaramba 0.33 patch ?
By the way, what do you mean by "Mandrake users: export KDEDIR" ?
Keep up the good job !
Report
Dominator
16 years ago
Report
floyde
16 years ago
Report
floyde
16 years ago
Report
p0tatis
16 years ago
Report