
Source (link to git-repo or to original if based on someone elses unmodified work): Add the source-code for this project on opencode.net
DVD AUthoring tool
Depends :
QT4.6
ffmpegthumbnailer
ffmpeg
transcode
perl
Sox
Mplayer
Mencoder
dvdauthor
Mjpegtools
Netpbm
mkisofs
XINE (optional)
exif
TO LAUNCH USE : ./2ManDVD -graphicssystem raster
7 years ago
ATTENTION BIG CHANGES
The biggest change in this release is how you compile / execute the program. These changes have been made to end a number of bugs attributed to improper installation files used by the application.
So after get the source and unpack ... run in console:
qmake or qmake-qt4 2ManDVD.pro 2ManDVD.pro (on fedora)
make
and finally:
sudo make install
And I stress the make install (as root)
Then you can start the application from your main menu (kde & gnome tested)
7 years ago
ATTENTION BIG CHANGES
The biggest change in this release is how you compile / execute the program. These changes have been made to end a number of bugs attributed to improper installation files used by the application.
So after get the source and unpack ... run in console:
qmake or qmake-qt4 2ManDVD.pro 2ManDVD.pro (on fedora)
make
and finally:
sudo make install
And I stress the make install (as root)
Then you can start the application from your main menu (kde & gnome tested)
csgib
11 years ago
Report
mnurolcay
11 years ago
Report
mnurolcay
11 years ago
Report
mnurolcay
11 years ago
And a question for packaging: which path does it check for translations? should be something like /usr/share/2mandvd/locale
Report
csgib
11 years ago
For the moment i would like ideas or critism (!!!) on the interface or bug chase
Sorry
Stéphane
Report
mnurolcay
11 years ago
Tried to put *.qm files in /usr/share/2mandvd and /usr/share/2mandvd/locale. Both failed. It's looking in /usr/bin, what's the wrong path for locale files.
Report
mnurolcay
11 years ago
Report
echoes
11 years ago
Report
jaryv1
11 years ago
Přeložil jsem 2ManDVD do češtiny. Soubor s překladem si můžete stáhnout na http://kmlinux.fjfi.cvut.cz/~jaryvlad/
Report
takedown
11 years ago
Hello!
I'm beginning to learn the program and it is amazing.
The only problem I have is:
I try to build a DVD from avi files.
When you add a file (91 min) 2mandvd says I have 86% free of my DVD... it is correct?
The size of the dvd resulting is too small, I sense that the dvd will not be able to play a dvd player.
:S
Report
mfernau
11 years ago
And I don't talk about a few seconds - After an hour the audio is many seconds (if not minutes) out of sync.
I've no clue what I do wrong here :(
Report
csgib
11 years ago
You can also convert your avi file to mpeg (DVD) with avidemux.
Stéphane
Report
mfernau
11 years ago
I'm looking forward for the next release then.
Your application is very nice btw!
Report
vagskarm
11 years ago
Is it possible to let me define the font size for the labels i add to menu's ?
Now i have to press enter to make force the recalculation of menu font, to have a smaller label. But if i re-open the project later, the labels are again very big.
Again my congrats
Vagelis
Report
csgib
11 years ago
Yes you can change the font size but whith the zoom tool (top menu). Text is known as an image... and fill your button size.
For the automatic resize when you reopen a project it's a bug and i'm working on it .... It's due to the return you put at the nd of your line.
Sorry for my english
Stéphane
Report
takedown
11 years ago
I'm beginning to learn the program and it is amazing.
The only problem I have is:
I try to build a DVD from avi files.
When you add a file (91 min) 2mandvd says I have 86% free of my DVD... it is correct?
The size of the dvd resulting is too small, I sense that the dvd will not be able to play a dvd player.
:S
sorry my poor english
Report
takedown
11 years ago
Report
angrykeyboarder
11 years ago
I'm hoping it's the former...
Report
gaspare66
11 years ago
There is only a problem: it's impossible to open an older project realized with a old version of the software.
Any solution?
Thanks.
Report
csgib
11 years ago
I take the opportunity to launch a call for mockups of idea for a totally new interface.
Hope a lot of people can help me...
Stéphane
Report
nedi24
11 years ago
there is a bug in 16/9 pal mode.
when i´m importing a media with wright parameters, mandvd don´t know it.
in 4/3 pal the video is marked as correct but when the dvd is ready the video is converted to 4/3 from 16/9.
the problem for me is that i want to create a 16/9 dvd and mandvd always reencode the video and the audio is after the encoding ahead of the video
mfg
Benedikt from austria
and sorry for my bad english :-)
Report
csgib
11 years ago
Can you try this form a console and give me the result
mplayer -identify -frames 0 yourmpegfile.mpg
Stéphane
Report
nedi24
11 years ago
Here is the output
the file was created with avidemux
MPlayer dev-SVN-r29116-4.3-openSUSE Linux 11.1 (x86_64)-Packman (C) 2000-2009 MPlayer TeamCan't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing das streben nach glück.mpg.
ID_VIDEO_ID=0
ID_AUDIO_ID=128
MPEG-PS file format detected.
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 4300.0 kbps (537.5 kbyte/s)
ID_FILENAME=das streben nach glück.mpg
ID_DEMUXER=mpegps
ID_VIDEO_FORMAT=0x10000002
ID_VIDEO_BITRATE=4300000
ID_VIDEO_WIDTH=720
ID_VIDEO_HEIGHT=576
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=8192
ID_AUDIO_BITRATE=0
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_LENGTH=6535.87
ID_SEEKABLE=1
ID_CHAPTERS=0
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 720 x 576 (preferred colorspace: Mpeg PES)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
The selected video_out device is incompatible with this codec.
Try appending the scale filter to your filter list,
e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Unsupported PixelFormat -1
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
ID_VIDEO_CODEC=ffmpeg2
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000)
ID_AUDIO_BITRATE=448000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [a52] afm: liba52 (AC3-liba52)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
ID_AUDIO_CODEC=a52
Starting playback...
Exiting... (End of file)
ID_EXIT=EOF
cu
Report
nedi24
11 years ago
Report
csgib
11 years ago
Stéphane
Report