It works well on SUSE 9.1, SUSE 10 and SLED 10.

The utilities dvdauthorwidget, konvenientSuse, kmpg2 do not use the changeWidgetText function as they do not need it. You cannot display file contents without these function, and you cannot edit your package descrition file.

The changeWidgetText function appeared in an early state of Kommander, it must be present in all of the Linux disros.

Do not vote me, but NOVELL! It is due to a patch from NOVELL on KDE, it is a KDE bug specific to SUSE 10.1.

- Sep 18 2006

Do you have Suse 10.1 x64 ?

The problem with SUSE is general.
I have SUSE SLED 10. I had to replace a function for the sake of SUSE 10 and SLED 10.

Before, I recompiled the Kommander utility without any success. I think the kdelibs are broken or patched by the SUSE team.

The changeWidgetText function cannot be replaced, it is a basic function. I intend to change the Extract page in the future, but the problem is more general on SUSE. The font handling of SUSE is heavily pathched. I use an Nvidia card, and I have to set the default font size to 28 - 32. SUSE do not folows the general rules for font rendering applied on other Linux based systems.

The problen is more complicated for 64 bit machines.


What are the font sizes displayed in the KDE Control Center?

'I tried to install SUSE 10.1 on my pc. The third installation was only successful. The first and the second installation resulted broken systems. There were other errors on SUSE 10.1, so I changed it for SLED 10.' It was written to linux3114a.
- Sep 15 2006

I ask you to open the kommander, the development tool. (Type simply 'kommander'!) Then create a new 'wizard'! Do not add to it anything. Save it and click ont the obtained name.kmdr file! Can you see a window, or happens nothing. Try to run kmdr-executor name.kmdr in comman line. If error message appears, your kommander is corrupt.
Download the following file:

http://www.kde.me.uk/kommander-tutorial/konstruct.kmdr

It must work. It is a classic teaching example for kommander.

- Sep 11 2006

Do you have SUSE for 64 Bit? - Sep 11 2006

Try this before:

kmdr-executor /usr/lib/rmt-installer/rmt-installer.kmdr

Maybe an other application tries to open it, not the kmdr-executor. - Sep 11 2006

The test on SUSE 10 has been finished.
There were not problems with it.
It also works on SUSE 9.1 and SLED 10.
The problem is specific to SUSE 10.1.

The line 1 is correct.
Try to download again the package.

If it does not help, try to remove the package kdewebdev3 and install the Kommander from source.

I tried to install SUSE 10.1 on my pc. The third installation was only successful. The first and the second installation resulted broken systems. There were other errors on SUSE 10.1, so I changed it for SLED 10.
- Sep 11 2006

Is there any error message?

Type in a Konsole:

kmdr-executor /usr/lib/rmt-installer/rmt-installer.kmdr

If it works:

Modify the file /usr/bin/rmt-installer!

Change the line

kmdr-executor $KDEDIR/lib/rmt-installer/rmt-installer.kmdr

to

kmdr-executor /usr/lib/rmt-installer/rmt-installer.kmdr

Or use it from the context menu, right click on a tar.gz or tar.bz2 file, Actions... see the first picture!


If does not work:

Try to run an other commander script downloaded from the Kommander Scripts section of kde-apps.org!
Is the result the same? - Sep 11 2006

Thanks for the information.
It was not tested on Slackware at all.

Open a konsole and type:
checkinstall.

I think, the checkinstall utility is not in the path, so it cannot be used. Make a link from the checkinstall AND installwatch scripts (can be found e.g. in the /usr/local/sbin) to the /usr/bin. - Sep 11 2006

It works on SUSE 9.1 and SLED 10.

You must tell more about the problem.
Open a Konsole and type rmt-installer.

If the wizard does not appear at all, you have to install the package kdewebdev3 or the Kommander from source.

You must also install the checkinstall package. (See the links above!)
- Sep 11 2006

I think, the programme installation watch function crashes with the kicker/KDE. Could you involve a switch (on/off) in the configuration settings?
- Aug 13 2006

Then I closed your applet and the consumption of the kicker normalized. - Aug 11 2006

The 42 % is not depend on any usage of the menu.
I compiled and installed it. At this time there was not any problem with it.
Next day I rebooted the computer, and it was too slow. The consumtion of the "kicker" showed 42 %.
It must be a bug. You have not to find ways to make it lighter. It worked well after the installation.
- Aug 11 2006

Unfortunately the 0.5.2 does not work well on Debian. Enabling the applet, the CPU consumption of the kicker is about 42 % (P4, 2.4 GHz).

- Aug 11 2006

Unfortunately, new crash was detected on Debian:

(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
.
.
.
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231632704 (LWP 2850)]
[KCrash handler]
#3 0x002e006d in ?? ()
#4 0xb73d7a9f in QListView::setCurrentItem () from /usr/lib/libqt-mt.so.3
#5 0xb614cb12 in TastyListView::slotOnItem ()
from /usr/lib/tastymenu_panelapplet.so
#6 0xb6159b00 in TastyListView::qt_invoke ()
from /usr/lib/tastymenu_panelapplet.so
#7 0xb72d4c93 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#8 0xb767b6b0 in QListView::onItem () from /usr/lib/libqt-mt.so.3
#9 0xb73da1e3 in QListView::contentsMouseMoveEvent ()
from /usr/lib/libqt-mt.so.3
#10 0xb6dae85d in KListView::contentsMouseMoveEvent ()
from /usr/lib/libkdeui.so.4
#11 0xb614d1f2 in TastyListView::contentsMouseMoveEvent ()
from /usr/lib/tastymenu_panelapplet.so
#12 0xb740b7b3 in QScrollView::viewportMouseMoveEvent ()
from /usr/lib/libqt-mt.so.3
#13 0xb740e241 in QScrollView::eventFilter () from /usr/lib/libqt-mt.so.3
#14 0xb73d2748 in QListView::eventFilter () from /usr/lib/libqt-mt.so.3
#15 0xb72d1b52 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3
#16 0xb72d1bdb in QObject::event () from /usr/lib/libqt-mt.so.3
#17 0xb730fdcd in QWidget::event () from /usr/lib/libqt-mt.so.3
#18 0xb726a698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#19 0xb726ac6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#20 0xb79276fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#21 0xb71fa653 in QApplication::sendSpontaneousEvent ()
from /usr/lib/libqt-mt.so.3
#22 0xb71f5825 in QETWidget::translateMouseEvent ()
from /usr/lib/libqt-mt.so.3
#23 0xb71f3dbe in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3
#24 0xb720d8c0 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#25 0xb7282da2 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#26 0xb7282ccb in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#27 0xb7269225 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#28 0xb6600334 in kdemain () from /usr/lib/libkdeinit_kicker.so
#29 0xb7f7b530 in kdeinitmain () from /usr/lib/kde3/kicker.so
#30 0x0804decd in ?? ()
#31 0x00000001 in ?? ()
#32 0x08074088 in ?? ()
#33 0xbfa9dbe8 in ?? ()
#34 0x0804def1 in ?? ()
#35 0x00000000 in ?? ()
- Aug 07 2006

I compiled Tasty Menu on Debian and SLED 10. On Debian rarely crashes occure. Unfortunately I cannot reproduce it.

I resized the window:
80 % -> 90 % width and height

then "Make this window a popup menu"

I resized the window:
90 % -> 80 % width and height

then I cliked to somewhere, then:


(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
.
.
.
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231239488 (LWP 2833)]
[KCrash handler]
#3 0xb78e1869 in KSycocaDict::hashKey () from /usr/lib/libkdecore.so.4
#4 0xb7976e3d in KSycocaDict::find_string () from /usr/lib/libkdecore.so.4
#5 0xb7c07fed in KServiceGroupFactory::findGroupByDesktopPath ()
from /usr/lib/libkio.so.4
#6 0xb7c081cf in KServiceGroup::group () from /usr/lib/libkio.so.4
#7 0xb62577d3 in MenuHandler::listClicked ()
from /usr/lib/tastymenu_panelapplet.so
#8 0xb62564c0 in MenuHandler::rootListClicked ()
from /usr/lib/tastymenu_panelapplet.so
#9 0xb626d0da in MenuHandler::qt_invoke ()
from /usr/lib/tastymenu_panelapplet.so
#10 0xb7334b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#11 0xb626cbf0 in TastyListView::activated ()
from /usr/lib/tastymenu_panelapplet.so
#12 0xb62603e7 in TastyListView::contentsMouseReleaseEvent ()
from /usr/lib/tastymenu_panelapplet.so
#13 0xb746b5cb in QScrollView::viewportMouseReleaseEvent ()
from /usr/lib/libqt-mt.so.3
#14 0xb746e1c5 in QScrollView::eventFilter () from /usr/lib/libqt-mt.so.3
#15 0xb7432748 in QListView::eventFilter () from /usr/lib/libqt-mt.so.3
#16 0xb7331b52 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3
#17 0xb7331bdb in QObject::event () from /usr/lib/libqt-mt.so.3
#18 0xb736fdcd in QWidget::event () from /usr/lib/libqt-mt.so.3
#19 0xb72ca698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#20 0xb72cac6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#21 0xb79876fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#22 0xb725a653 in QApplication::sendSpontaneousEvent ()
from /usr/lib/libqt-mt.so.3
#23 0xb7255ae4 in QETWidget::translateMouseEvent ()
from /usr/lib/libqt-mt.so.3
#24 0xb7253dbe in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3
#25 0xb726d8c0 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#26 0xb72e2da2 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#27 0xb72e2ccb in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#28 0xb72c9225 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#29 0xb6661334 in kdemain () from /usr/lib/libkdeinit_kicker.so
#30 0xb7fda530 in kdeinitmain () from /usr/lib/kde3/kicker.so
#31 0x0804decd in ?? ()
#32 0x00000001 in ?? ()
#33 0x08073e10 in ?? ()
#34 0xbfdff388 in ?? ()
#35 0x0804def1 in ?? ()
#36 0x00000000 in ?? ()

(Is it a real crash? Maybe some configuration file left from the previous installation. How can I remove them?)
- Aug 03 2006

"You can find a library for displaying Webshots images as background images for KDE:

http://www.kde-apps.org/content/show.php?content=43440

It can be used by the most popular KDE image viewers too. The thumbnail generation is also possible with this library for konqueror."
- Aug 02 2006

I mean "extraction" not "conversion".

(Conversion: WBZ -> BMP -> JPG
Extraction: WBZ -> JPEG in a lostless way.)

The problem both "extraction" and "conversion" depend on the Webshots' whim. - Aug 01 2006

I installed the qt 4.0.0 downloaded from trhe Trolltech's site on the folowing systems:
Suse (SLED 10)
Debian testing (2006. January)

Both of them give the following error message:

/usr/bin/uic-qt4 src/maincontrol.ui -o ui_maincontrol.h
/usr/bin/uic-qt4 src/light.ui -o ui_light.h
/usr/bin/uic-qt4 src/material.ui -o ui_material.h
/usr/bin/uic-qt4 src/entire.ui -o ui_entire.h
/usr/bin/uic-qt4 src/animat.ui -o ui_animat.h
g++ -c -pipe -O2 -Wall -W -D_REENTRANT -DQT_NO_DEBUG -DQT_CORE_LIB -DQT_GUI_LIB -DQT_OPENGL_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4 -I/usr/X11R6/include -I. -I. -o main.o src/main.cpp
./ui_animat.h: In member function 'void Ui_aniUI::setupUi(QWidget*)':
./ui_animat.h:85: error: 'class QProgressBar' has no member named 'setOrientation'
make: *** [main.o] Error 1

Then, I istalled the qt 4.1.4 version downloaded from trhe Trolltech's site.

Zhu3d can be compiled only with this version. If I were you, I reinstalled the qt 4.0.0 version, otherwise Zhu3d could be compiled only on unstable linux versions.

There is another problem present:
The characters in the menus are too small to read it (4-5 pixels), so I can navigate only seeing your screenshots.
Why does not Zhu3d use the system settings?
I use Nvidia's driver. I suppose you have another card. After installing the Nvidia's driver, the character sizes must be heavily enlarged for the system.
- Aug 01 2006

It is a useful tool both for linux and windows.
Is there any licencing problem concerning the conversion of Webshots files to jpg?

The most popular image viewer on windows, Irfanview supported the Webshots format in the past. Then, Webshots asked to be removed from this utility.

I think, the use of Webshots images on linux does not offend the licence, but the conversion? It depends on the Webshots' whim.

You can find a library for displaying Webshots images as background images for KDE:

http://www.kde-apps.org/content/show.php?content=43440

It can be used by the most popular KDE image viewers too. The thumbnail generation is also possible with this library for konqueror.
- Jul 31 2006

The uic-qt4 is a binary file and is in the libqt4-dev Debian package (testing and unstable). It is in the

/usr/bin/ and linked to the qt4 /bin directory.

Trolltech does not deliver just a Debian-special version, but it is patched my the Debian community.

All of the qt4 packages are installed on my system, and I can successfully install another qt4 applications.

What about the symbol conflict?

Do you use qt4.0 or qt4.1, gcc3 or ggc4?

Can you include your Makefile generated by qmake in the source package? I could edit it manually for Debian systems.
- Jul 28 2006

Unfortunately, using the "Most used applications" and the "Recent applications" Tasty Menu crashes every time.

The outputs:

Show: Most used applications

(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231378752 (LWP 2817)]
[KCrash handler]
#3 0xb623c53e in MenuHandler::fillMoreUsed ()
from /usr/lib/tastymenu_panelapplet.so
#4 0xb623d2cc in MenuHandler::menuModeChanged ()
from /usr/lib/tastymenu_panelapplet.so
#5 0xb6252abd in MenuHandler::qt_invoke ()
from /usr/lib/tastymenu_panelapplet.so
#6 0xb7312b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#7 0xb73134a5 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#8 0xb76aca5e in QComboBox::activated () from /usr/lib/libqt-mt.so.3
#9 0xb73b9daf in QComboBox::internalActivate () from /usr/lib/libqt-mt.so.3
#10 0xb76accac in QComboBox::qt_invoke () from /usr/lib/libqt-mt.so.3
#11 0xb7312b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#12 0xb73134a5 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#13 0xb76b648b in QListBox::selected () from /usr/lib/libqt-mt.so.3
#14 0xb7400cbe in QListBox::mouseDoubleClickEvent ()
from /usr/lib/libqt-mt.so.3
#15 0xb734df0a in QWidget::event () from /usr/lib/libqt-mt.so.3
#16 0xb72a8698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#17 0xb72a8c6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#18 0xb79656fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#19 0xb72385e5 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3
#20 0xb73ba882 in QComboBox::eventFilter () from /usr/lib/libqt-mt.so.3
#21 0xb730fb52 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3
#22 0xb730fbdb in QObject::event () from /usr/lib/libqt-mt.so.3
#23 0xb734ddcd in QWidget::event () from /usr/lib/libqt-mt.so.3
#24 0xb72a8698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#25 0xb72a8c6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#26 0xb79656fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#27 0xb7238653 in QApplication::sendSpontaneousEvent ()
from /usr/lib/libqt-mt.so.3
#28 0xb7233784 in QETWidget::translateMouseEvent ()
from /usr/lib/libqt-mt.so.3
#29 0xb7231dbe in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3
#30 0xb724b8c0 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#31 0xb72c0da2 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#32 0xb72c0ccb in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#33 0xb72a7225 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#34 0xb663f334 in kdemain () from /usr/lib/libkdeinit_kicker.so
#35 0xb7fb8530 in kdeinitmain () from /usr/lib/kde3/kicker.so
#36 0x0804decd in ?? ()
#37 0x00000001 in ?? ()
#38 0x08073e28 in ?? ()
#39 0xbfedc2c8 in ?? ()
#40 0x0804def1 in ?? ()
#41 0x00000000 in ?? ()


Show: Recent applications

(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231677760 (LWP 9056)]
[KCrash handler]
#3 0xb61f30a2 in MenuHandler::fillRecentlyUsed ()
from /usr/lib/tastymenu_panelapplet.so
#4 0xb61f42ec in MenuHandler::menuModeChanged ()
from /usr/lib/tastymenu_panelapplet.so
#5 0xb6209abd in MenuHandler::qt_invoke ()
from /usr/lib/tastymenu_panelapplet.so
#6 0xb72c9b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#7 0xb72ca4a5 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#8 0xb7663a5e in QComboBox::activated () from /usr/lib/libqt-mt.so.3
#9 0xb7370daf in QComboBox::internalActivate () from /usr/lib/libqt-mt.so.3
#10 0xb7663cac in QComboBox::qt_invoke () from /usr/lib/libqt-mt.so.3
#11 0xb72c9b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#12 0xb72ca4a5 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#13 0xb766d48b in QListBox::selected () from /usr/lib/libqt-mt.so.3
#14 0xb73b7cbe in QListBox::mouseDoubleClickEvent ()
from /usr/lib/libqt-mt.so.3
#15 0xb7304f0a in QWidget::event () from /usr/lib/libqt-mt.so.3
#16 0xb725f698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#17 0xb725fc6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#18 0xb791c6fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#19 0xb71ef5e5 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3
#20 0xb7371882 in QComboBox::eventFilter () from /usr/lib/libqt-mt.so.3
#21 0xb72c6b52 in QObject::activate_filters () from /usr/lib/libqt-mt.so.3
#22 0xb72c6bdb in QObject::event () from /usr/lib/libqt-mt.so.3
#23 0xb7304dcd in QWidget::event () from /usr/lib/libqt-mt.so.3
#24 0xb725f698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#25 0xb725fc6b in QApplication::notify () from /usr/lib/libqt-mt.so.3
#26 0xb791c6fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#27 0xb71ef653 in QApplication::sendSpontaneousEvent ()
from /usr/lib/libqt-mt.so.3
#28 0xb71ea784 in QETWidget::translateMouseEvent ()
from /usr/lib/libqt-mt.so.3
#29 0xb71e8dbe in QApplication::x11ProcessEvent () from /usr/lib/libqt-mt.so.3
#30 0xb72028c0 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#31 0xb7277da2 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#32 0xb7277ccb in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#33 0xb725e225 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#34 0xb65f6334 in kdemain () from /usr/lib/libkdeinit_kicker.so
#35 0xb7f6f530 in kdeinitmain () from /usr/lib/kde3/kicker.so
#36 0x0804decd in ?? ()
#37 0x00000001 in ?? ()
#38 0x08073e10 in ?? ()
#39 0xbff921b8 in ?? ()
#40 0x0804def1 in ?? ()
#41 0x00000000 in ?? ()

The other functions seem to be work without any crash. - Jul 28 2006

I send you the output:

root@Knx4Sid:/media/hda3/debian/INSTALL/3d/zhu3d# qmake zhu3d.pro
QFile::open: No file name specified
QFile::open: No file name specified
qt_config.prf:8: Unknown test function: debug
WARNING: Found potential symbol conflict of error.cpp (src/error.cpp) in SOURCES
WARNING: Found potential symbol conflict of error.h (src/error.h) in HEADERS
root@Knx4Sid:/media/hda3/debian/INSTALL/3d/zhu3d#
root@Knx4Sid:/media/hda3/debian/INSTALL/3d/zhu3d# make
Makefile:393: warning: overriding commands for target `error.o'
Makefile:337: warning: ignoring old commands for target `error.o'
Makefile:481: warning: overriding commands for target `moc_error.o'
Makefile:463: warning: ignoring old commands for target `moc_error.o'
Makefile:520: warning: overriding commands for target `src/moc_error.cpp'
Makefile:502: warning: ignoring old commands for target `src/moc_error.cpp'
/uic-qt4 src/maincontrol.ui -o src/maincontrol.h
make: /uic-qt4: Command not found
make: *** [src/maincontrol.h] Error 127


I have not /uic-qt4, but I have uic-qt4.
I think, this error is not due to the symbol conflict.
So, I modified the Makefile:
/uic-qt4 -> uic-qt4

root@Knx4Sid:/media/hda3/debian/INSTALL/3d/zhu3d# make
Makefile:393: warning: overriding commands for target `error.o'
Makefile:337: warning: ignoring old commands for target `error.o'
Makefile:481: warning: overriding commands for target `moc_error.o'
Makefile:463: warning: ignoring old commands for target `moc_error.o'
Makefile:520: warning: overriding commands for target `src/moc_error.cpp'
Makefile:502: warning: ignoring old commands for target `src/moc_error.cpp'
uic-qt4 src/maincontrol.ui -o src/maincontrol.h
uic-qt4 src/light.ui -o src/light.h
uic-qt4 src/material.ui -o src/material.h
uic-qt4 src/entire.ui -o src/entire.h
uic-qt4 src/animat.ui -o src/animat.h
g++ -c -pipe -Wall -W -O2 -DQT_NO_DEBUG -I/usr/share/qt4/mkspecs/linux-g++ -I. -o main.o src/main.cpp
src/main.cpp:16:24: error: QApplication: No such file or directory
src/main.cpp:17:17: error: QIcon: No such file or directory
src/main.cpp:18:23: error: QMessageBox: No such file or directory
src/main.cpp:19:19: error: QObject: No such file or directory
In file included from src/main.cpp:21:
src/mainwindow.h:20:23: error: QMainWindow: No such file or directory
src/mainwindow.h:21:19: error: QWidget: No such file or directory
src/mainwindow.h:22:19: error: QString: No such file or directory
src/mainwindow.h:26:28: error: ui_maincontrol.h: No such file or directory
In file included from src/mainwindow.h:27,
from src/main.cpp:21:
src/glwidget.h:20:50: error: QGLWidget: No such file or directory
In file included from src/gldraw.h:21,
from src/glwidget.h:22,
from src/mainwindow.h:27,
from src/main.cpp:21:
src/property.h:24:22: error: QByteArray: No such file or directory
In file included from src/mainwindow.h:28,
from src/main.cpp:21:
src/ligedit.h:21:23: error: QCloseEvent: No such file or directory
src/ligedit.h:22:21: error: QSettings: No such file or directory
src/ligedit.h:24:22: error: ui_light.h: No such file or directory
In file included from src/mainwindow.h:29,
from src/main.cpp:21:
src/matedit.h:24:25: error: ui_material.h: No such file or directory
In file included from src/mainwindow.h:30,
from src/main.cpp:21:
src/entedit.h:24:23: error: ui_entire.h: No such file or directory
In file included from src/mainwindow.h:31,
from src/main.cpp:21:
src/aniedit.h:23:18: error: QTimer: No such file or directory
src/aniedit.h:25:23: error: ui_animat.h: No such file or directory
In file included from src/mainwindow.h:33,
from src/main.cpp:21:
src/sysinfo.h:21:43: error: QtOpenGL: No such file or directory
src/property.h:182: error: expected ',' or '...' before 'qstr'
src/property.h:182: error: ISO C++ forbids declaration of 'QString' with no type
src/glwidget.h:31: error: 'QString' does not name a type
src/glwidget.h:44: error: expected class-name before '{' token
src/glwidget.h:46: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/glwidget.h:48: error: expected ';' before 'public'
src/glwidget.h:56: error: expected `:' before 'slots'
src/glwidget.h:58: error: expected primary-expression before 'void'
src/glwidget.h:58: error: ISO C++ forbids declaration of 'slots' with no type
src/glwidget.h:58: error: expected ';' before 'void'
src/glwidget.h:261: error: expected primary-expression before 'void'
src/glwidget.h:261: error: ISO C++ forbids declaration of 'signals' with no type
src/glwidget.h:261: error: expected ';' before 'void'
src/glwidget.h:281: error: 'QMouseEvent' has not been declared
src/glwidget.h:282: error: 'QMouseEvent' has not been declared
src/glwidget.h:283: error: 'QMouseEvent' has not been declared
src/glwidget.h:284: error: 'QCloseEvent' has not been declared
src/glwidget.h:292: error: ISO C++ forbids declaration of 'QAction' with no type
src/glwidget.h:292: error: expected ';' before '*' token
src/glwidget.h:293: error: 'QPoint' does not name a type
src/glwidget.h: In member function 'void OGLWidget::zoomIn()':
src/glwidget.h:63: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::zoomOut()':
src/glwidget.h:64: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::transLeft()':
src/glwidget.h:67: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::transRight()':
src/glwidget.h:68: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::transUp()':
src/glwidget.h:69: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::transDown()':
src/glwidget.h:70: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::drawModeTriangle()':
src/glwidget.h:78: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::drawModeQuad()':
src/glwidget.h:79: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::drawModePoint()':
src/glwidget.h:80: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::drawModeParameter()':
src/glwidget.h:81: error: 'emit' was not declared in this scope
src/glwidget.h:81: error: expected `;' before 'updMaiWid'
src/glwidget.h: In member function 'void OGLWidget::toggleF0()':
src/glwidget.h:84: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::toggleF1()':
src/glwidget.h:85: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::toggleF2()':
src/glwidget.h:86: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::toggleF3()':
src/glwidget.h:87: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::toggleCross()':
src/glwidget.h:90: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::toggleAxes()':
src/glwidget.h:91: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::newFileOpened()':
src/glwidget.h:116: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::updateGLonly()':
src/glwidget.h:117: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::setLigAll(int)':
src/glwidget.h:131: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::ediLigAll(int)':
src/glwidget.h:142: error: 'emit' was not declared in this scope
src/glwidget.h:142: error: expected `;' before 'updLigWid'
src/glwidget.h: In member function 'void OGLWidget::setSpotA(int)':
src/glwidget.h:166: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::setSpotI(int)':
src/glwidget.h:167: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::setSpotX(int)':
src/glwidget.h:168: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::setSpotY(int)':
src/glwidget.h:169: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::setSpotZ(int)':
src/glwidget.h:170: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::togSpot(bool)':
src/glwidget.h:171: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::ediMatAll(int)':
src/glwidget.h:189: error: 'emit' was not declared in this scope
src/glwidget.h:189: error: expected `;' before 'updMatWid'
src/glwidget.h: In member function 'void OGLWidget::matexp(int)':
src/glwidget.h:220: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::modInf()':
src/glwidget.h:255: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::modLoc()':
src/glwidget.h:256: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::modOne()':
src/glwidget.h:257: error: 'emit' was not declared in this scope
src/glwidget.h:257: error: expected `;' before 'updMatWid'
src/glwidget.h:257: error: 'updateGL' was not declared in this scope
src/glwidget.h: In member function 'void OGLWidget::modTwo()':
src/glwidget.h:258: error: 'updateGL' was not declared in this scope
src/ligedit.h: At global scope:
src/ligedit.h:34: error: expected class-name before ',' token
src/ligedit.h:34: error: 'Ui' has not been declared
src/ligedit.h:34: error: expected class-name before '{' token
src/ligedit.h:36: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/ligedit.h:38: error: expected ';' before 'public'
src/ligedit.h:43: error: 'QCloseEvent' has not been declared
src/ligedit.h:45: error: expected `:' before 'slots'
src/ligedit.h:46: error: expected primary-expression before 'void'
src/ligedit.h:46: error: ISO C++ forbids declaration of 'slots' with no type
src/ligedit.h:46: error: expected ';' before 'void'
src/matedit.h:34: error: expected class-name before ',' token
src/matedit.h:34: error: 'Ui' has not been declared
src/matedit.h:34: error: expected class-name before '{' token
src/matedit.h:36: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/matedit.h:38: error: expected ';' before 'public'
src/matedit.h:43: error: 'QCloseEvent' has not been declared
src/matedit.h:45: error: expected `:' before 'slots'
src/matedit.h:46: error: expected primary-expression before 'void'
src/matedit.h:46: error: ISO C++ forbids declaration of 'slots' with no type
src/matedit.h:46: error: expected ';' before 'void'
src/entedit.h:34: error: expected class-name before ',' token
src/entedit.h:34: error: 'Ui' has not been declared
src/entedit.h:34: error: expected class-name before '{' token
src/entedit.h:36: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/entedit.h:38: error: expected ';' before 'public'
src/entedit.h:43: error: 'QCloseEvent' has not been declared
src/entedit.h:45: error: expected `:' before 'slots'
src/entedit.h:46: error: expected primary-expression before 'void'
src/entedit.h:46: error: ISO C++ forbids declaration of 'slots' with no type
src/entedit.h:46: error: expected ';' before 'void'
src/aniedit.h:43: error: expected class-name before ',' token
src/aniedit.h:43: error: 'Ui' has not been declared
src/aniedit.h:43: error: expected class-name before '{' token
src/aniedit.h:45: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/aniedit.h:47: error: expected ';' before 'public'
src/aniedit.h:52: error: 'QCloseEvent' has not been declared
src/aniedit.h:59: error: expected `:' before 'slots'
src/aniedit.h:60: error: expected primary-expression before 'void'
src/aniedit.h:60: error: ISO C++ forbids declaration of 'slots' with no type
src/aniedit.h:60: error: expected ';' before 'void'
src/aniedit.h:70: error: expected primary-expression before 'void'
src/aniedit.h:70: error: ISO C++ forbids declaration of 'signals' with no type
src/aniedit.h:70: error: expected ';' before 'void'
src/aniedit.h:78: error: ISO C++ forbids declaration of 'QTimer' with no type
src/aniedit.h:78: error: expected ';' before '*' token
src/sysinfo.h:28: error: 'QString' does not name a type
src/mainwindow.h:41: error: 'QString' does not name a type
src/mainwindow.h:42: error: 'QString' does not name a type
src/mainwindow.h:56: error: expected class-name before ',' token
src/mainwindow.h:56: error: 'Ui' has not been declared
src/mainwindow.h:56: error: expected class-name before '{' token
src/mainwindow.h:58: error: ISO C++ forbids declaration of 'Q_OBJECT' with no type
src/mainwindow.h:60: error: expected ';' before 'public'
src/mainwindow.h:64: error: 'QCloseEvent' has not been declared
src/mainwindow.h:66: error: expected `:' before 'slots'
src/mainwindow.h:67: error: expected primary-expression before 'void'
src/mainwindow.h:67: error: ISO C++ forbids declaration of 'slots' with no type
src/mainwindow.h:67: error: expected ';' before 'void'
src/mainwindow.h:71: error: expected `:' before 'slots'
src/mainwindow.h:72: error: expected primary-expression before 'void'
src/mainwindow.h:72: error: ISO C++ forbids declaration of 'slots' with no type
src/mainwindow.h:72: error: expected ';' before 'void'
src/mainwindow.h:103: error: expected primary-expression before 'void'
src/mainwindow.h:103: error: ISO C++ forbids declaration of 'signals' with no type
src/mainwindow.h:103: error: expected ';' before 'void'
src/mainwindow.h:117: error: expected ',' or '...' before '&' token
src/mainwindow.h:117: error: ISO C++ forbids declaration of 'QString' with no type
src/mainwindow.h:118: error: expected ',' or '...' before '&' token
src/mainwindow.h:118: error: ISO C++ forbids declaration of 'QString' with no type
src/mainwindow.h:119: error: expected ',' or '...' before '&' token
src/mainwindow.h:119: error: ISO C++ forbids declaration of 'QString' with no type
src/mainwindow.h:120: error: 'QString' does not name a type
src/mainwindow.h:121: error: 'QString' does not name a type
src/mainwindow.h:125: error: ISO C++ forbids declaration of 'QWidget' with no type
src/mainwindow.h:125: error: expected ';' before '*' token
src/mainwindow.h:126: error: ISO C++ forbids declaration of 'QTextEdit' with no type
src/mainwindow.h:126: error: expected ';' before '*' token
src/mainwindow.h:139: error: ISO C++ forbids declaration of 'QToolBar' with no type
src/mainwindow.h:139: error: expected ';' before '*' token
src/mainwindow.h:140: error: ISO C++ forbids declaration of 'QToolBar' with no type
src/mainwindow.h:140: error: expected ';' before '*' token
src/mainwindow.h:141: error: ISO C++ forbids declaration of 'QToolBar' with no type
src/mainwindow.h:141: error: expected ';' before '*' token
src/mainwindow.h:142: error: ISO C++ forbids declaration of 'QToolBar' with no type
src/mainwindow.h:142: error: expected ';' before '*' token
src/mainwindow.h: In member function 'void MainWindow::closeEvent(int*)':
src/mainwindow.h:64: error: request for member 'accept' in '* event', which is of non-class type 'int'
src/main.cpp: At global scope:
src/main.cpp:33: error: 'QString' does not name a type
src/main.cpp:34: error: 'QString' does not name a type
src/main.cpp: In function 'int main(int, char**)':
src/main.cpp:56: error: 'QApplication' was not declared in this scope
src/main.cpp:56: error: expected `;' before 'app'
src/main.cpp:59: error: 'QIcon' was not declared in this scope
src/main.cpp:59: error: expected `;' before 'appIcon'
src/main.cpp:60: error: 'app' was not declared in this scope
src/main.cpp:60: error: 'appIcon' was not declared in this scope
src/main.cpp:61: error: 'appPath' was not declared in this scope
src/main.cpp:61: error: 'QCoreApplication' has not been declared
src/main.cpp:61: error: 'applicationDirPath' was not declared in this scope
src/main.cpp:65: error: 'argStr' was not declared in this scope
src/main.cpp:81: error: 'QMessageBox' has not been declared
src/main.cpp:83: error: 'QObject' has not been declared
src/main.cpp:83: error: 'tr' was not declared in this scope
src/main.cpp:84: error: 'QObject' has not been declared
src/main.cpp:86: error: 'critical' was not declared in this scope
src/main.cpp:92: error: 'QMessageBox' has not been declared
src/main.cpp:94: error: 'QObject' has not been declared
src/main.cpp:94: error: 'tr' was not declared in this scope
src/main.cpp:95: error: 'QObject' has not been declared
src/main.cpp:98: error: 'information' was not declared in this scope
src/main.cpp:112: error: 'class MainWindow' has no member named 'show'
make: *** [main.o] Error 1
- Jul 28 2006

I tried to edit makefile, but every time new problems appeared. The first two were two strange paths for files...

I will give you all of them.

I can succesfully install other qt4 applications.
- Jul 27 2006

The version 0.4.1 seems to work without any crash on Debian, but we should wait some days before claiming it to be stable...
I will test it comprehensively.
- Jul 27 2006

Cannot be installed on Debian.
Tonns of errors in the makefile.
It cannot find the uic-qt4, but it is installed, it is in the path and the environmental variables have been set correctly. It cannot be edited manually, a total revision is need.
- Jul 27 2006

Crash on Debian.
The output:

(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231616320 (LWP 6755)]
[KCrash handler]
#3 0xb6212a9e in TastyListViewItem::setup ()
from /usr/lib/tastymenu_panelapplet.so
#4 0xb73cc899 in QListViewItem::totalHeight () from /usr/lib/libqt-mt.so.3
#5 0xb73cc907 in QListViewItem::totalHeight () from /usr/lib/libqt-mt.so.3
#6 0xb73d1cd7 in QListView::buildDrawableList () from /usr/lib/libqt-mt.so.3
#7 0xb73d6078 in QListViewItem::setOpen () from /usr/lib/libqt-mt.so.3
#8 0xb620b5f1 in MenuHandler::populateList ()
from /usr/lib/tastymenu_panelapplet.so
#9 0xb620bc70 in MenuHandler::listClicked ()
from /usr/lib/tastymenu_panelapplet.so
#10 0xb620ac40 in MenuHandler::rootListClicked ()
from /usr/lib/tastymenu_panelapplet.so
#11 0xb620b83a in MenuHandler::populateList ()
from /usr/lib/tastymenu_panelapplet.so
#12 0xb620cda8 in MenuHandler::MenuHandler ()
from /usr/lib/tastymenu_panelapplet.so
#13 0xb6206e3c in TastyMenu::TastyMenu ()
from /usr/lib/tastymenu_panelapplet.so
#14 0xb620712c in init () from /usr/lib/tastymenu_panelapplet.so
#15 0xb6603e74 in PluginManager::loadApplet ()
from /usr/lib/libkdeinit_kicker.so
#16 0xb6609d77 in AppletContainer::AppletContainer ()
from /usr/lib/libkdeinit_kicker.so
#17 0xb660a26b in PluginManager::createAppletContainer ()
from /usr/lib/libkdeinit_kicker.so
#18 0xb660b3bc in ContainerArea::loadContainers ()
from /usr/lib/libkdeinit_kicker.so
#19 0xb660c0d5 in ContainerArea::initialize ()
from /usr/lib/libkdeinit_kicker.so
#20 0xb660c212 in PanelExtension::populateContainerArea ()
from /usr/lib/libkdeinit_kicker.so
#21 0xb660e1dc in PanelExtension::qt_invoke ()
from /usr/lib/libkdeinit_kicker.so
#22 0xb72d8b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#23 0xb7669055 in QSignal::signal () from /usr/lib/libqt-mt.so.3
#24 0xb72f6a40 in QSignal::activate () from /usr/lib/libqt-mt.so.3
#25 0xb72fe354 in QSingleShotTimer::event () from /usr/lib/libqt-mt.so.3
#26 0xb726e698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#27 0xb726e8b6 in QApplication::notify () from /usr/lib/libqt-mt.so.3
#28 0xb792b6fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#29 0xb71fe5e5 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3
#30 0xb725f98c in QEventLoop::activateTimers () from /usr/lib/libqt-mt.so.3
#31 0xb721235c in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#32 0xb7286f48 in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#33 0xb726d1ca in QApplication::processEvents () from /usr/lib/libqt-mt.so.3
#34 0xb726d1f5 in QApplication::processEvents () from /usr/lib/libqt-mt.so.3
#35 0xb6614153 in ExtensionManager::initialize ()
from /usr/lib/libkdeinit_kicker.so
#36 0xb6614739 in ExtensionManager::qt_invoke ()
from /usr/lib/libkdeinit_kicker.so
#37 0xb72d8b57 in QObject::activate_signal () from /usr/lib/libqt-mt.so.3
#38 0xb7669055 in QSignal::signal () from /usr/lib/libqt-mt.so.3
#39 0xb72f6a40 in QSignal::activate () from /usr/lib/libqt-mt.so.3
#40 0xb72fe354 in QSingleShotTimer::event () from /usr/lib/libqt-mt.so.3
#41 0xb726e698 in QApplication::internalNotify () from /usr/lib/libqt-mt.so.3
#42 0xb726e8b6 in QApplication::notify () from /usr/lib/libqt-mt.so.3
#43 0xb792b6fc in KApplication::notify () from /usr/lib/libkdecore.so.4
#44 0xb71fe5e5 in QApplication::sendEvent () from /usr/lib/libqt-mt.so.3
#45 0xb725f98c in QEventLoop::activateTimers () from /usr/lib/libqt-mt.so.3
#46 0xb721235c in QEventLoop::processEvents () from /usr/lib/libqt-mt.so.3
#47 0xb7286da2 in QEventLoop::enterLoop () from /usr/lib/libqt-mt.so.3
#48 0xb7286ccb in QEventLoop::exec () from /usr/lib/libqt-mt.so.3
#49 0xb726d225 in QApplication::exec () from /usr/lib/libqt-mt.so.3
#50 0xb6606334 in kdemain () from /usr/lib/libkdeinit_kicker.so
#51 0xb7f7d530 in kdeinitmain () from /usr/lib/kde3/kicker.so
#52 0x0804decd in ?? ()
#53 0x00000001 in ?? ()
#54 0x08073e10 in ?? ()
#55 0xbf9a0498 in ?? ()
#56 0x0804def1 in ?? ()
#57 0x00000000 in ?? ()

After resizing the window, the kicker bar completely disappears. - Jul 24 2006

Contrary to kbfx, works well.
KDE does not delay to start, I do not need a magnifier to see the menu.

I propose a new feature concerning an adjustable column height for higher resoulution monitors. - Jul 12 2006

More info about the verification bug:
http://bugs.kde.org/show_bug.cgi?id=119544#c14

About reading a data disk on windows:

What kind of data disk you talking about?
A simple CD, multisession CD, DVD or multisession DVD?

The possible problems with codecs like lame, ffmpeg is not connected to k3b but the lack of contribution of the three different projects. - Jun 28 2006

Do not expect to much from k3b on debian.
Not only the verification fails, but the copied CDs cannot be played with CD players. (The tracks will not be recognized.)
You can install ffmpegcvs downloaded from the mplayer's home page. The distro's ffmpeg is very old. The problem is the similar for Lame. You can download it eg. from the ubuntu site:
http://packages.ubuntu.com/dapper/source/lame
and compile from source. So, k3b can be compiled with lame mp3 and ffmpeg support. Another question is that these codecs work with k3b or does not. Do not be optimist!



- Jun 27 2006

I accept Aladrink's answer, but I do not Lunimare's one.

Aladrink is a user determined by the trends, but Lunimare presented a design.

What would happen if nobody followed the "tendency of market"?
It could be the MS's fate, maybe Novell's. Linux is not a participant of the market, although the market is determined by Linux. SuSE was a good distribution till the 9.x series. SuSE 10.0 is slow and fails to install correctly on several computers. The DVD version of 10.1 cannot be installed on any computer. This could be the only affect of the market on SuSE. Linux becomes weak on the market. Linux can be strong only without the market. Linux is a right to use an OS on your computer.

"If MS published an ugly theme, nobody would want to copy it."
I am not sure of that. Every Windows user not using Linux believe to MS's advertising: "Windows is the best and the only useful OS on PC's".

"New things and old things will continue to be invented and reinventeds and the consumption mass will decide the way to follow."

The designers' task is to determine the consumption and not to be determined by the consumption. The designer is who invent and reinvent things and not the consumption. The desing is before the consumption.
- May 26 2006

What would happen if everybody followed the "tendency of market"?
Who will create new things? I mean things do not follow the "tendency of market".
Every new think is "out". Then they will determine the new trends.

Do MS determine the Linux trends?
Or we, Linux users?
- May 24 2006

I have not problem with your work.

I have only problem with the left corner, down. The kbfx delays the KDE startup about 5-10 sec. It is a Vista imitation and strange on Linux systems, so cannot be integrated.

The transparency is not from the Vista, it is from xfree/xorg. It can be integrated into Linux, but not into Windows. So, Vista is slow.

Linux never will become to Vista. There is not two identical things is the world.

Keep your own work, but do not continue MS's work on Linux.
- May 22 2006

Why Linux users dream about Vista?
Linux has more value and future than Windows.
XGL can be installed on your existing computer, you need not to by a new one and an air conditioner.
A background picture is not only about...

(I have not voted.)
- May 18 2006

The version 2.21 also resizes the colomn widths. Bsc could be a useful tool with fixed column widths.

- May 17 2006

The double click problem is solved in the version 0.1a on Debian. The default DOUBLECLICK_VALUE in the src/koast.h file is optimal.

I forgot to tell you about an other problem:
The koast configuration file is missing after installation. It must be copied manually. It is not a problem for me, because I create deb packages, but the others...
- May 15 2006

I would use Beesoft Commander instead of krusader, because it is simplier, but there is a problem with it. Changing the directory, it resizes the column with. It makes Beesoft Commander slow and boring for my eyes.
Switching off the resize function must be an option for the user.


- May 04 2006

Clicking on
"other download (Tulliana 2.0 - wider preview)"

Forbidden
You don't have permission to access the page at http://ic1.deviantart.com/fs10/i/2006/122/4/8/Tulliana_2_0_by
- May 04 2006

You are right.
I used the mouse-double-clicks.
Their is no other control-center-module using the double-click-event. I think, the Control Center can not handle this at all, or the second click is not taken into consideration by KDE Control Center. Is it possible to clear the second click after opening an application? There must be a solution for the problem.
- May 03 2006

In the case of K3b 0.12.15 still have the "Could not find flle..." problem on Debian systems.

It can be compiled with FLAC.
- Apr 26 2006

It is not the most important problem Konqeror side bar. The sidebar after 4a slowers Konqueror and causes crash if you work too fast (e.g. you move files).

It must be fix first.
- Apr 26 2006

It can be compiled for Debian Sid/Kanotix, but every application run again after closing them. E.g. closing Synaptic Synaptic run again. It must be closed one more time.

- Apr 26 2006

See one of my picture:

http://www.kde-look.org/content/show.php?content=31481

If you afraid of Internet Explorer, you will see IE. (I do not see it.) If you said Debian, everybody see a Debian logo, and will score as "good". First is the ideology the second is the ...
It is my dilemma and fortunatety not yours. - Apr 24 2006

I like your pictures, but I am thinking about the low scores. You named it "red whirl". What would happen if you changed the name to e.g. "Debian whirl"? What kind of things determine scores? My opinion:

1. ideology (KDE, Debian, SUSE)
2. artistic effects
3. practicality (e.g. the icons can be seen on it and therefore can be used as a wallpapper)
- Apr 21 2006

Kompile can be sucessfully compliled on Debian.
I have tested it. I found that the configure and the make steps are very slow with it, about 2 times slower then the ./Configure and make without Kompile. I like it and I am waiting for the final version. - Apr 10 2006

I do not use GIMP for SVG pictures.
I use Inkscape:

http://www.inkscape.org/

SVG files can be considered as "sources" of the pictures. (Open it with a text editor!) If you do not like e.g. the colors, you can easely edit the enclosed SVG file.


- Mar 14 2006

The output for Debian if FLAC support is enabled:

k3bflacdecoder.cpp: In member function 'virtual QString K3bFLACDecoder::technicalInfo(const QString&) const':
k3bflacdecoder.cpp:320: error: request for member 'get_field' in '((K3bFLACDecoder::Private*)((const K3bFLACDecoder*)this)->K3bFLACDecoder::d)->K3bFLACDecoder::Private::comments-> FLAC::Metadata::VorbisComment::get_vendor_string()', which is of non-class type 'const FLAC__byte*'
make[4]: *** [k3bflacdecoder.lo] Error 1
make[4]: Leaving directory `/media/hda3/debian/INSTALL/k3b/12.14/k3b-0.12.14/plugins/decoder/flac'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/media/hda3/debian/INSTALL/k3b/12.14/k3b-0.12.14/plugins/decoder'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/media/hda3/debian/INSTALL/k3b/12.14/k3b-0.12.14/plugins'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/media/hda3/debian/INSTALL/k3b/12.14/k3b-0.12.14'
make: *** [all] Error 2

- Mar 14 2006

In the case of K3b 0.12.14 still have the "Could not find flle..." problem on Debian systems.

When I choosed the 103 characters Joliet file names but nothing else from the advanced options, the verification failed.
After that continuing the project, I burned a second session. The "Allow lowercase characters in ISO9660 filenames" option was enabled, and the verification worked fine also for the imported previous session. (In this case the previous session also was verified. I think, because the time of the scanning process was too long.)

Verification worked fine without enabling the "Allow lowercase characters in ISO9660 filenames" when I burned files with only ISO 9660 file names.
I think, the verification problem is not an essential bug, but only a "miscommunication" of the burning dialog.

The 0.12.14 version of K3b can only be compiled without FLAC. (The error messages will be presented next time.) So, the version 0.12.12 was better.

I have the following problem with the automatic settings:

I burned a 450 MB session, then I burned a second, 10 MB session using the automatic option. K3b closed the 650 MB disk with more than 100 MB free space. What will happen, if I continue a disk with 300 MB free space, or a DVD with 1 GB free space? I cannot predict the behavior of K3b.

K3b cannot display the free space on the disk, only the summarized file sizes. This means that e.g. 610 Mb can bee seen, but the 650 Mb CD is full.

Does K3b use the same buffer size for burning DVDs and CDs?
- Mar 13 2006

KIso cannot save the modified ISO file,
instead ERASES the original file!!!

CAUSES DATA LOST!

Only use it for ISO viewer on Debian KDE (3.4.3).

- Mar 06 2006

In some cases not just data project verification fails. There are broken sessions/files if:

1. you burn DVD with several thousands of small files using the max speed in DAO mode, and the buffer size is the default;
2. you continue a multisession CD (in some cases, there are broken files);
3. you use a CD writer demand a special cdrwtools/cdrecord switch (not supported by k3b).

So the data verification could be very important. Burning optimisation is not possible without this function.

I have problems with the default settings, and the meaning of the "auto" options. (What does the "auto" means, eg. continue a multisession disk, or continue and close? How can I find out its meaning?)

The version 0.12.13 does not compiles with gcc4 on Debian. Only gcc3.4 can be used.
- Mar 06 2006

I cannot compile the 0.4.8 version.
I have successfully compiled the 0.4.8.2 CVS.
I have repacked the binaries from SUSE (Guru) and Mandriva (Tex) for Debian (testing).

There are lot of (common) bugs in all of the above versions.

The kcfg module has several warnings, e.g:

kdecore (KConfigDialogManager): WARNING: A widget named 'kcfg_ThemeList' was found but there is no setting named 'ThemeList'
kdecore (KConfigDialogManager): WARNING: A widget named 'kcfg_CategoryWidth_2' was found but there is no setting named 'CategoryWidth_2'

The theme cannot be changed, the .kbfx directory cannot be opened.

The menu (Vista) can be read only with a magnifier. Using background picture is not a good solution: the window cannot be sized.
There are many bugs also in the menu. The characters disappeare when moving towards the left side of the window.

It is not convinient to scroll the menu using the mouse wheel. Moving the mouse pointer up- and downside also must force to scroll the menu.
In this state of the kbfx, I do not see any advantage of kbfx menu against the K-menu.

Buggy and inconvinient. I do not understand the kbfx funs.
- Mar 02 2006