I take look at your code, and I must say you didn't change anything except screenlet version... :S

Your theme is great and I like it(vote good), but in it also says that I made it.. :S you need to change theme.conf and write down your data ;)

ps. it would be nice if you upload only your theme, but without my code (because you didn't change anything in it...)

Best regards!
Jovicic Nemanja - Feb 18 2009
can you link me wallpaper? - Feb 05 2009
Perfect Clock for Linux

Conky by Whise 24 comments

install screenlets v0.1.2 - Feb 04 2009
All Day Long (Animated Wallpaper)

Wallpaper Other by edren 142 comments

great job!! - Feb 04 2009
Net Monitor

Conky by drxnele 78 comments

i made it finally :)
try it and report bugs if you find some... - Feb 04 2009
WirelessScreenlet

Conky by drxnele 84 comments

it's not problem with screenlet...

look at your iwconfig...
it says

eth1 IEEE 802.11 Nickname:""
Access Point: Not-Associated



and it should be something like this

wlan0 IEEE 802.11g ESSID:"HALLSYS-NET-NRV"
Mode:Managed Frequency:2.432 GHz Access Point: 00:14:78:EE:F2:D8
Bit Rate=36 Mb/s Tx-Power:20 dBm Sensitivity=-109 dBm
RTS thr=2347 B Fragment thr=2346 B
Power Management:off
Link Quality:73/100 Signal level:-49 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

------------
do you see diference...
in your case screenlet has no data to read from command output so it doesn't work :S
- Feb 03 2009
very nice... :D
cool led effect... - Jan 14 2009
Net Monitor

Conky by drxnele 78 comments

yes of course... but i have problems with my computer so i cant do it in close future, it will be after new year - Dec 15 2008
WirelessScreenlet

Conky by drxnele 84 comments

fck it if doesn't work... but... hm... I don't know why doesnt work for you...

use this direct link
http://www.fileden.com/files/2007/8/23/1373806/download/Wireless.tar.gz - Dec 10 2008
Net Monitor

Conky by drxnele 78 comments

i will make that... but i have problem with my computer so i can't do it right now... it will be fixed in max 2 weeks - Dec 08 2008
WirelessScreenlet

Conky by drxnele 84 comments

hm... it works for me... look my ping result...

--- www.njsoft.iz.rs ping statistics ---
63 packets transmitted, 63 packets received, 0% packet loss
round-trip min/avg/max = 230.2/250.5/350.9 ms
- Nov 30 2008
DigitalClock

Conky by drxnele 80 comments

no, there isn't that option... if you want that you must edit code and themes :) - Nov 16 2008
Inkscape

Vector Graphics by molumen2 8 comments

i draw themes for my screenlets and for my other program... i love it :):):) - Nov 09 2008
Net Monitor

Conky by drxnele 78 comments

fixed now :) - Nov 08 2008
WirelessScreenlet

Conky by drxnele 84 comments

there is one ifconfig and one iwconfig call in code... use find option in your text editor and replace it with /sbin/ifconfig and /sbin/iwconfig
write if success... - Nov 04 2008
WirelessScreenlet

Conky by drxnele 84 comments

sudo apt-get install screenlets
i made type error - Nov 04 2008
WirelessScreenlet

Conky by drxnele 84 comments

1)open terminal
2)sudo apt-get install-screenlets
3) mkdir .screenlets
4)tar - xvzf Desktop/Wireless.tar.gz
(i assumed that you downloaded it to Desktop)
5)cp Desktop/Wireless .screenlets - Nov 04 2008
WirelessScreenlet

Conky by drxnele 84 comments

fixed :)
i edited this screenlet to show "ip:unknown" if there is no ip in ifconfig output... and not to show not connected... - Nov 03 2008
WirelessScreenlet

Conky by drxnele 84 comments

it's a problem of ifconfig because it's not showing ip... same on my 8.10... i'm on it... - Nov 03 2008
DigitalClock

Conky by drxnele 80 comments

it works for me... hm... I'll change my file hosting in morning just in case...
tnx for good vote :) - Sep 29 2008
I like it :) - Sep 23 2008
DigitalClock

Conky by drxnele 80 comments

wtf? themes didn't uploaded... but... grrr....stupid me, forgot how to use bzr - Sep 14 2008
DigitalClock

Conky by drxnele 80 comments

i can't upload... don't know why... it starts upload and then freeze here:

drxnele@Burgulos:~/universal-applets-extras$ bzr push lp:~screenlets-extras-team/screenlets/screenlets-extras
| [=============================.....................................] Copying content texts 3/5 - Sep 13 2008
DigitalClock

Conky by drxnele 80 comments

tomorow im drunk now :)::):):) - Sep 12 2008
DigitalClock

Conky by drxnele 80 comments

sorry... fixed now... - Sep 12 2008
DigitalClock

Conky by drxnele 80 comments

some new themes are here now :) - Sep 11 2008
Net Monitor

Conky by drxnele 78 comments

it should be working with ppp0 device... it works for me... i am using pppoe conection too...

1st way
1)connect with pppoe screenlet
2)go to settings of this screenlet and setup ppp0 device...

because device ppp0 DOESN'T exist before connecting...

2nd way to setup ppp0 device:
1)turn off netmonitor
2)open /home/drxnele/.config/Screenlets/Netmonitor/default/Netmonitor1.ini
3)edit line dev=wlan0(or eth0...)to def=ppp0
4)save, close, start screenlet

as i write above when you are not connected to ppp0, netmonitor isn't going to show anything because then device ppp0 doesn't exist
(i'll fix this in next version...) - Sep 03 2008
WirelessScreenlet

Conky by drxnele 84 comments

i saw similar post on fedora forums... but this solution is for individual users... solution on this forum was to run eg /usr/sbin/iwconfig but in my case (on ubuntu) its on /sbin/iwconfig... - Aug 26 2008
WirelessScreenlet

Conky by drxnele 84 comments

what? :) i don't understand... could you explain? - Aug 21 2008
AmarokControl

Conky by drxnele 25 comments

link is ok... i tryed it just now and it works fine - Aug 13 2008
WirelessScreenlet

Conky by drxnele 84 comments

i tryed your iwconfig and ifconfig output with my test wireless screenlet and it works... don't know what is wrong... :( - Aug 11 2008
Net Monitor

Conky by drxnele 78 comments

nice idea... i am on it, ill add option to chose date to start counting... :) it will be done as soon as possible... (i am working on slot mashine game for linux right now) - Jul 13 2008
drxnele@Burgulos:~$ nvidia-settings -q all

Attributes for Burgulos:0.0:

Attribute 'DigitalVibrance' (Burgulos:0.0; display device: CRT-0): 0.
The valid values for 'DigitalVibrance' are in the range 0 - 63
(inclusive).
'DigitalVibrance' is display device specific.
'DigitalVibrance' can use the following target types: X Screen, GPU.

Attribute 'ImageSharpening' (Burgulos:0.0; display device: CRT-0): 0.
The valid values for 'ImageSharpening' are in the range 0 - 31
(inclusive).
'ImageSharpening' is display device specific.
'ImageSharpening' can use the following target types: X Screen, GPU.

Attribute 'BusType' (Burgulos:0.0): 0.
The valid values for 'BusType' are in the range 0 - 3 (inclusive).
'BusType' is a read-only attribute.
'BusType' can use the following target types: X Screen, GPU.

Attribute 'BusRate' (Burgulos:0.0): 8.
The valid values for 'BusRate' are in the range 1 - 8 (inclusive).
'BusRate' is a read-only attribute.
'BusRate' can use the following target types: X Screen, GPU.

Attribute 'VideoRam' (Burgulos:0.0): 131072.
'VideoRam' is an integer attribute.
'VideoRam' is a read-only attribute.
'VideoRam' can use the following target types: X Screen, GPU.

Attribute 'Irq' (Burgulos:0.0): 20.
'Irq' is an integer attribute.
'Irq' is a read-only attribute.
'Irq' can use the following target types: X Screen, GPU.

Attribute 'OperatingSystem' (Burgulos:0.0): 0.
The valid values for 'OperatingSystem' are in the range 0 - 2 (inclusive).
'OperatingSystem' is a read-only attribute.
'OperatingSystem' can use the following target types: X Screen, GPU.

Attribute 'SyncToVBlank' (Burgulos:0.0): 0.
'SyncToVBlank' is a boolean attribute; valid values are: 1 (on/true) and 0
(off/false).
'SyncToVBlank' can use the following target types: X Screen.

Attribute 'AllowFlipping' (Burgulos:0.0): 1.
'AllowFlipping' is a boolean attribute; valid values are: 1 (on/true) and 0
(off/false).
'AllowFlipping' can use the following target types: X Screen.

Attribute 'LogAniso' (Burgulos:0.0): 0.
The valid values for 'LogAniso' are in the range 0 - 3 (inclusive).
'LogAniso' can use the following target types: X Screen.

Attribute 'FSAA' (Burgulos:0.0): 0.
Valid values for 'FSAA' are: 0, 1, 2, 5, 6, 7, 8 and 9.
'FSAA' can use the following target types: X Screen.

Attribute 'TextureSharpen' (Burgulos:0.0): 0.
'TextureSharpen' is a boolean attribute; valid values are: 1 (on/true) and
0 (off/false).
'TextureSharpen' can use the following target types: X Screen.

Attribute 'TwinView' (Burgulos:0.0): 0.
'TwinView' is a boolean attribute; valid values are: 1 (on/true) and 0
(off/false).
'TwinView' is a read-only attribute.
'TwinView' can use the following target types: X Screen.

Attribute 'ConnectedDisplays' (Burgulos:0.0): 0x00000103.
'ConnectedDisplays' is a bitmask attribute.
'ConnectedDisplays' is a read-only attribute.
'ConnectedDisplays' can use the following target types: X Screen, GPU.

Attribute 'EnabledDisplays' (Burgulos:0.0): 0x00000001.
'EnabledDisplays' is a bitmask attribute.
'EnabledDisplays' is a read-only attribute.
'EnabledDisplays' can use the following target types: X Screen, GPU.

Attribute 'AssociatedDisplays' (Burgulos:0.0): 0x00000001.
'AssociatedDisplays' is a bitmask attribute.
'AssociatedDisplays' can use the following target types: X Screen.

Attribute 'Depth30Allowed' (Burgulos:0.0): 0.
'Depth30Allowed' is a boolean attribute; valid values are: 1 (on/true) and
0 (off/false).
'Depth30Allowed' is a read-only attribute.
'Depth30Allowed' can use the following target types: X Screen, GPU.

Attribute 'ForceGenericCpu' (Burgulos:0.0): 0.
'ForceGenericCpu' is a boolean attribute; valid values are: 1 (on/true) and
0 (off/false).
'ForceGenericCpu' can use the following target types: X Screen.

Attribute 'GammaCorrectedAALines' (Burgulos:0.0): 0.
'GammaCorrectedAALines' is a boolean attribute; valid values are: 1
(on/true) and 0 (off/false).
'GammaCorrectedAALines' can use the following target types: X Screen.

Attribute 'CursorShadow' (Burgulos:0.0): 0.
'CursorShadow' is a boolean attribute; valid values are: 1 (on/true) and 0
(off/false).
'CursorShadow' can use the following target types: X Screen.

Attribute 'CursorShadowXOffset' (Burgulos:0.0): 4.
The valid values for 'CursorShadowXOffset' are in the range 0 - 32
(inclusive).
'CursorShadowXOffset' can use the following target types: X Screen.

Attribute 'CursorShadowYOffset' (Burgulos:0.0): 2.
The valid values for 'CursorShadowYOffset' are in the range 0 - 32
(inclusive).
'CursorShadowYOffset' can use the following target types: X Screen.

Attribute 'CursorShadowAlpha' (Burgulos:0.0): 64.
The valid values for 'CursorShadowAlpha' are in the range 0 - 254
(inclusive).
'CursorShadowAlpha' can use the following target types: X Screen.

Attribute 'CursorShadowRed' (Burgulos:0.0): 0.
The valid values for 'CursorShadowRed' are in the range 0 - 255
(inclusive).
'CursorShadowRed' can use the following target types: X Screen.

Attribute 'CursorShadowGreen' (Burgulos:0.0): 0.
The valid values for 'CursorShadowGreen' are in the range 0 - 255
(inclusive).
'CursorShadowGreen' can use the following target types: X Screen.

Attribute 'CursorShadowBlue' (Burgulos:0.0): 0.
The valid values for 'CursorShadowBlue' are in the range 0 - 255
(inclusive).
'CursorShadowBlue' can use the following target types: X Screen.

Attribute 'FSAAAppControlled' (Burgulos:0.0): 1.
'FSAAAppControlled' is a boolean attribute; valid values are: 1 (on/true)
and 0 (off/false).
'FSAAAppControlled' can use the following target types: X Screen.

Attribute 'LogAnisoAppControlled' (Burgulos:0.0): 1.
'LogAnisoAppControlled' is a boolean attribute; valid values are: 1
(on/true) and 0 (off/false).
'LogAnisoAppControlled' can use the following target types: X Screen.

Attribute 'RefreshRate' (Burgulos:0.0; display device: CRT-0): 60.17 Hz.
'RefreshRate' is an integer attribute.
'RefreshRate' is a read-only attribute.
'RefreshRate' is display device specific.
'RefreshRate' can use the following target types: X Screen, GPU.

Attribute 'InitialPixmapPlacement' (Burgulos:0.0): 1.
The valid values for 'InitialPixmapPlacement' are in the range 0 - 4
(inclusive).
'InitialPixmapPlacement' can use the following target types: X Screen.

Attribute 'DynamicTwinview' (Burgulos:0.0): 1.
'DynamicTwinview' is an integer attribute.
'DynamicTwinview' is a read-only attribute.
'DynamicTwinview' can use the following target types: X Screen.

Attribute 'MultiGpuDisplayOwner' (Burgulos:0.0): 0.
'MultiGpuDisplayOwner' is an integer attribute.
'MultiGpuDisplayOwner' is a read-only attribute.
'MultiGpuDisplayOwner' can use the following target types: X Screen.

Attribute 'GPUErrors' (Burgulos:0.0): 0.
'GPUErrors' is an integer attribute.
'GPUErrors' is a read-only attribute.
'GPUErrors' can use the following target types: X Screen.

Attribute 'GvoSupported' (Burgulos:0.0): 0.
'GvoSupported' is a boolean attribute; valid values are: 1 (on/true) and 0
(off/false).
'GvoSupported' is a read-only attribute.
'GvoSupported' can use the following target types: X Screen.

Attribute 'OpenGLImageSettings' (Burgulos:0.0): 1.
The valid values for 'OpenGLImageSettings' are in the range 0 - 3
(inclusive).
'OpenGLImageSettings' can use the following target types: X Screen.

Attribute 'XVideoTextureSyncToVBlank' (Burgulos:0.0): 1.
The valid values for 'XVideoTextureSyncToVBlank' are in the range 0 - 1
(inclusive).
'XVideoTextureSyncToVBlank' can use the following target types: X Screen.

Attribute 'XVideoBlitterSyncToVBlank' (Burgulos:0.0): 0.
The valid values for 'XVideoBlitterSyncToVBlank' are in the range 0 - 1
(inclusive).
'XVideoBlitterSyncToVBlank' can use the following target types: X Screen.

Attribute 'XVideoSyncToDisplay' (Burgulos:0.0): 0x00000001.
'XVideoSyncToDisplay' is a bitmask attribute.
'XVideoSyncToDisplay' can use the following target types: X Screen.

Attribute 'GPUDefault2DClockFreqs' (Burgulos:0.0): 250,400.
'GPUDefault2DClockFreqs' is a packed integer attribute.
'GPUDefault2DClockFreqs' is a read-only attribute.
'GPUDefault2DClockFreqs' can use the following target types: X Screen,
GPU.

Attribute 'GPUDefault3DClockFreqs' (Burgulos:0.0): 250,400.
'GPUDefault3DClockFreqs' is a packed integer attribute.
'GPUDefault3DClockFreqs' is a read-only attribute.
'GPUDefault3DClockFreqs' can use the following target types: X Screen,
GPU.

Attribute 'GPU2DClockFreqs' (Burgulos:0.0): 250,400.
The valid values for 'GPU2DClockFreqs' are in the ranges 62 - 500, 100 -
1000 (inclusive).
'GPU2DClockFreqs' can use the following target types: X Screen, GPU.

Attribute 'GPU3DClockFreqs' (Burgulos:0.0): 250,400.
The valid values for 'GPU3DClockFreqs' are in the ranges 62 - 500, 100 -
1000 (inclusive).
'GPU3DClockFreqs' can use the following target types: X Screen, GPU.

Attribute 'GPUCurrentClockFreqs' (Burgulos:0.0): 250,400.
'GPUCurrentClockFreqs' is a packed integer attribute.
'GPUCurrentClockFreqs' is a read-only attribute.
'GPUCurrentClockFreqs' can use the following target types: X Screen, GPU.

Attribute 'GPUPerfModes' (Burgulos:0.0): perf=0, nvclock=250, memclock=400

Attribute 'NvidiaDriverVersion' (Burgulos:0.0): 169.12

Attribute 'NvControlVersion' (Burgulos:0.0): 1.14

Attribute 'GLXServerVersion' (Burgulos:0.0): 1.4

Attribute 'GLXClientVersion' (Burgulos:0.0): 1.4

Attribute 'OpenGLVersion' (Burgulos:0.0): 2.1.2 NVIDIA 169.12

Attribute 'XRandRVersion' (Burgulos:0.0): 1.2

Attribute 'XF86VidModeVersion' (Burgulos:0.0): 2.2

Attribute 'XvVersion' (Burgulos:0.0): 2.2

Attribute 'GPUCurrentPerfMode' (Burgulos:0.0): 1.
'GPUCurrentPerfMode' is an integer attribute.
'GPUCurrentPerfMode' is a read-only attribute.
'GPUCurrentPerfMode' can use the following target types: X Screen, GPU.

Attribute 'GPUCurrentPerfLevel' (Burgulos:0.0): 0.
'GPUCurrentPerfLevel' is an integer attribute.
'GPUCurrentPerfLevel' is a read-only attribute.
'GPUCurrentPerfLevel' can use the following target types: X Screen, GPU.

Attribute 'GPUAdaptiveClockState' (Burgulos:0.0): 1.
'GPUAdaptiveClockState' is an integer attribute.
'GPUAdaptiveClockState' is a read-only attribute.
'GPUAdaptiveClockState' can use the following target types: X Screen, GPU.

Attribute 'GPUPowerSource' (Burgulos:0.0): 0.
'GPUPowerSource' is an integer attribute.
'GPUPowerSource' is a read-only attribute.
'GPUPowerSource' can use the following target types: X Screen, GPU.
- Jul 11 2008
i think my gf 5200 is hotter then Sun :)

something is wrong...
my card is
gigabyte gforce FX5200
- Jul 06 2008
DigitalClock

Conky by drxnele 80 comments

I could try... :) - Jul 04 2008
DigitalClock

Conky by drxnele 80 comments

you mean GPL licence? do i copy it in separate file called LICENCE or in *screenlet.py file? - Jun 29 2008
DigitalClock

Conky by drxnele 80 comments

how to do this? i would like to see my application in such great project... - Jun 27 2008
Net Monitor

Conky by drxnele 78 comments

this could be because of transparent picture in background, try clicking on text or that blue globe icon and then move... - Jun 27 2008
Screenlets 0.1.2

Conky by Whise 18 comments

it doesn't start i ran it from terminal and it shows errors... i think that it has problem with new kernel... when i run mixer command used in screenlet i get output like this

drxnele@Burgulos:~$ amixer sget %s | awk '/^ Limits/{print $5}'
amixer: Unable to find simple control '%s',0
- Jun 20 2008
WirelessScreenlet

Conky by drxnele 84 comments

install screenlets package first
then extract this WirelesScreenlet to /home/$USER/.screenlets - Jun 11 2008
Screenlets 0.1.2

Conky by Whise 18 comments

hey friend... you shouldn't leave this project... it's only the greatest thing after compiz fusion... take your deserved vacation and get back... you are "the master of screenlets" ;) - Jun 07 2008
Net Monitor

Conky by drxnele 78 comments

i made mistake in this rm -rf command it should be like this

rm -rf ~/.config/Screenlets/Netmonitor ~/.config/Screenlets/NetmonitorScreenlet.log - Jun 05 2008
Net Monitor

Conky by drxnele 78 comments

i dont know what could cause this... try remove it and deleting its config files

rm -rf ~/.config/Screenlets/Netmonitor /home/drxnele/.config/Screenlets/NetmonitorScreenlet.log

and then install it again.. - Jun 05 2008
Net Monitor

Conky by drxnele 78 comments

download 1.9MB?? did you mean GB :)
when you are visiting page it doesnt only download, its uploading too (not much)... its normal to have 151MB of month upload even if you are not uploading by yourself... - Jun 03 2008
WirelessScreenlet

Conky by drxnele 84 comments

thanks... i think that draw_text function that i used was creating this memory leak... i can't remember but i think i read somewhere that its cause memory leak.. now i change it to use draw_text function from screenlet core... - May 21 2008
Weather extended

Conky by Whise 8 comments

hi, i don't have 6th day data and when i use mini mode i can move screenlet when i hold left mouse button below it's backround image (in place where is big background image when it's on) - May 21 2008
WirelessScreenlet

Conky by drxnele 84 comments

i fix it as you told...
thanks... :) - May 13 2008
WirelessScreenlet

Conky by drxnele 84 comments

sorry for my mistake... - May 13 2008
WirelessScreenlet

Conky by drxnele 84 comments

i am going to kill myself because these litle diferences between diferent ifconfigs aaa... i thing that I can't made universal I can only tell you what to replace it it's code...
maybe I come up an idea later but for now you need to replace line 204:
ip = ip[ip.find(":")+1:]
with this:
ip = ip[ip.find(": ")+1:]

(its diferent only in space crap... little thing make so much trouble) - May 13 2008
Screenlets 0.1.1

Conky by Whise 18 comments

deb can't install on fiesty :( only hardy - May 10 2008